Stressing Equipment

Stressing Jacks are  equipment used to tension cable anchor.

FAB500 25 TON STRESSING JACK FRONT GRIP

  • Design Force: 25 Ton
  • Pressure: 70MPa
  • RAM Area: 3 534mm2
  • Stroke: 125mm
  • Strand Projection: 100mm
  • Weight: 20kg
  • Length off strand needed to tension only 50mm​

  • handles with better grip to lift​

  • Smaller Jaw more cost effective​

  • No more cropping of anchor

FAB171 10 TON STRESSING JACK

  • 10 Ton stressing hydraulic stressing jack.
  • Front gripping (minimum strand length for gripping 85mm).
  • Suitable for tensioning 13mm and 15mm cable anchors.
  • Easy to change gripping wedges/jaws.
  • Powered by double acting hydraulic pump.
  • Weight – 11.7kg.

FAB170 25 TON STRESSING JACK

  • 25 Ton hydraulic stressing jack
  • Rear gripping (minimum strand length for gripping 500mm)
  • Suitable for tensioning 13mm, 15mm & 18mm cable anchors.
  • Easy to change gripping wedges/jaws powered by double acting hydraulic pump
  • Weight – 17.5kg

Stressing Pumps are used to actuate a variety of single and double acting hydraulic rams. These stressing pumps are compatible with most single and double acting hydraulic cylinders.

 

FAB470 HYDRAULIC HAND PUMP

The FAB 470 Pump is engineered to meet or exceed ANSI B30.1 Standards for Performance and
Safety. The unique two stage hydraulic circuit allows quick displacement of hydraulic fluid under no
load conditions and easy pumping in loaded conditions. These lever operated pumps supply
compressed hydraulic fluid to compatible applications i.e. rams, presses, spreaders, compactors and
crimping machines, anywhere that 10 000 PSI of fluid pressure is needed.

Usable Oil Capacity – 2100 cm³
Oil Capacity (cc) 2200
Oil Displacement per stroke – 1st Stage 13.2 cm³
Oil Displacement per stroke – 2nd Stage 2.3 cm³
Operating Forces – 45kg
Piston Stroke (cm) – 2.1
Oil Outlet Port – 3/8”NPTF
Mass: 14.7kg
Max. Operating Pressure – 10 000 PSI 700 BAR
Handle Operating Force – (N) 440.4
Steel Reservoir Construction

FAB600 AIR HYDRAULIC STRESSING PUMP

  • Double acting hydraulic pump (4-way valve)
  • Maximum output pressure – 10 000psi/690 Bar
  • Air intensified (operates with compressed air)
  • Ergonomic design for minimum operator effort
  • Large reservoir

FAB601 AIR HYDRAULIC STRESSING PUMP

  • Air Input: +/- 6 Bar
  • Max Out Pressure: 60MPa
  • Mass: 22kg
  • Gauge Type: Tonnage

FAB460 HYDRAULIC STRESSING PUMP

  • Heavy duty double acting hydraulic pump (4-way valve)
  • Maximum output pressure – 10 000psi/690 Bar.
  • Hand operated
  • Large reservoir
  • High volume per stroke
  • Rugged construction

FAB159 HYDRAULIC STRESSING PUMP

  • Double acting hydraulic pump (4-way valve)
  • Maximum output pressure – 10 000psi/690 Bar
  • Hand operated
  • Large reservoir

Power Packs intensifies hydraulic over hydraulic or air over hydraulic. Depending on the client’s specifications, flameproofing, pump displacement and reservoir volume maybe altered to meet their needs.

POWER PACKS

  • Intensification hydraulic over hydraulic / air over hydraulic.
  • Maximum output pressure 60MPa
  • Valve solenoid actuated / mechanical
  • Pump displacement customer specified.
  • Reservoir volume customer specified.
  • Electrical supply 220V single phase / 380V three phase (electric intensified units only).